• Heat Output of 3kW
  • Free Standing Cast Iron Multifuel stove
  • Up to more than 81% Efficient when Burning wood
  • 2 Different air stages combine to make a highly efficient and very attractive stove
    • Primary air is pulled in from the lower front plate to start and increase the combustion process
    • Secondary air from the back is fed through chambers to the front, part of this is used to air-wash the glass
  • Classic Stove with Modern Specifications
  • Manual control as standard
  • Glass fronted stove
  • Unique Air-wash System which provides a permanent airflow over the window to help keep the glass clean
  • Choice of Top or Rear flue Connection for flexible installation
  • Ashpan and Safety Gloves are provided
  • Note: Stove pipe not included with this stove, available from all good local Builders & Plumbers Merchants
  • Depth of 350mm
Product Code: 0127-136534

Hillandale Monterrey 3 MultiFuel Stove

Depth 350 mm
Efficiency 81 %
Height 540 mm
Output 3 kW
Weight 90 kg
Width 430 mm

NOTE: The free delivery service offered on this product is based on a one man only delivery. Due to the nature and weight of this product, you will need to arrange additional assistance to offload the goods from the vehicle when it arrives. A curb-side d_rop off service is provided with this product. Heat outputs are based on Ancit Tests, outputs vary with fuel types. For minimum clearances please refer to installation instructions. The glass may blacken on lower settings, however increasing the heat should burn any subsidiary carbon off. NOTE: Please ensure to have a survey carried out by a qualified Hetas approved Solid Fuel engineer to check and certify the compatibility of your chimney with this stove before making any purchase to avoid disappointment. Note: This stove produces substantial heat output which may affect the interior and exterior appearance of the stove, over time through general wear and tear which is quite normal and to expected when burning Solid Fuel. If you would like further information on Solid Fuel, call the Solid Fuel Association on 0845 601 4406 or Email or to have a look at their website Alternatively if you would like to find your nearest Hetas approved engineer, simply call HETAS on 0845 634 5626 or Email or to have a look at their Website where you will find a comprehensive list of engineers.