Crystal Fires Jewel Horizon Gas Fire

Crystal Fires Jewel Horizon Gas Fire

Hover your mouse over the image to Zoom In

Options for the Crystal Fires Jewel Horizon Gas Fire...

 

 

Finishes

Crystal Stone Effect Finish
Crystal Stone Effect Finish
included in price
select:
Crystal Texture Black Front Frame
Crystal Texture Black Front Frame
included in price
select:
Crystal Graphite Grey Front Frame
Crystal Graphite Grey Front Frame
included in price
select:

Trims

Crystal Fires Jewel Horizon Gas Flame Effect Only
Crystal Fires Jewel Horizon Gas Flame Effect Only
included in price
select:
Crystal Fires Jewel Horizon Gas With Pebble Effect
Crystal Fires Jewel Horizon Gas With Pebble Effect
included in price
select:

Gas Types

Crystal Fires Natural Gas (NG)
Crystal Fires Natural Gas (NG)
included in price
select:

Controls

Crystal Fires Manual Control
Crystal Fires Manual Control
included in price
select:
Crystal Fires Remote Control
Crystal Fires Remote Control
£135.00
select:

Extras

Crystal Fires 7 Inch Flue Spiggot Required
Crystal Fires 7 Inch Flue Spiggot Required
£30.00
select:
Crystal Fires 5 Inch Gather Hood Required
Crystal Fires 5 Inch Gather Hood Required
£51.00
select:

Description

  • Maximum heat output of up to 2Kw
  • Manual control (as standard) with optional extra battery remote control available at additional cost
  • Choice of either a Black, Graphite or Stone Effect outer trim finishes
  • Open fronted inset gas fire with a choice of either a dancing flame effect only with no fuel effect or with Contemporary Pebbles
  • Designed for homes with a class 1 7"chimney or class 2 5" prefabricated flue
  • Available in Natural gas version only
  • Depth of 300mm fully inset required
 Product Code: 0006-0042
Was £749.00 Delivery estimate 7 working days
£567.00 inc vat free delivery

Crystal Fires Jewel Horizon Gas Fire

Inset Depth 290 mm
Inset Height 415 mm
Inset Width 760 mm
Outset Height 650 mm
Outset Width 895 mm

Maximum heat output high 2Kw, Maximum heat input high 6.9Kw, Contemporary Hole In The Wall Gas Fire, Suitable for class 1 chimneys & class 2 5" prefabricated flues, An air vent is not normally required. NOTE: Please ensure to have a survey carried out by a Gas Safe Register registered gas installer to check and certify the compatibility of your chimney or flue with this fire before making any purchase to avoid disappointment. This product does not require a hearth on the floor providing the product is installed up in the wall with a minimum height from floor level as detailed in the instructions. The 5" & 7" gather hood options are available if you are connecting to a prefabricated flue or in instances where the product is being installed into an open chimney without a liner, which will also help to minimise heat loss and soot / debris falls onto the fire. Please note that whilst soot deposits on a gas fire are quite normal and to be expected, they will be more visible on a pebble or log fuel effect. Similarly you may experience discolouration on the stainless steel back panel behind the fire which will vary in degree dependant on the flue pull and other local conditions, which again is quite normal and to be expected. The Crystal Fires battery operated remote control option allows the flame height to vary between high and low from your armchair once the pilot has been ignited / lit manually. It is recommended that this fire should not be used as a sole source of heat rather as a secondary source in conjunction with central heating. All information contained in the website is to assist in your choice of a suitable fire. This is not intended to be all the information required to install your fire. This can be obtained from Crystal themselves. For more detailed information about this product visit www.crystalfires.co.uk