Description

  • Inset Multifuel Boiler Stove
  • Up to 14.2kW Gross output with 2.2kW (7,500Btu/h) going to the room and 12kW (41,000Btu/h) to water
  • Heats up to 10 Radiators and Domestic Hot Water
  • Steel and Cast iron construction
  • Twin Doors with Large ceramic glass viewing windows
  • Capable of burning fuels such as Smokeless Fuel, Coal, Wood, Peat or a mixture of these fuels
  • Thermostat is included to ensure optimum water and room temperature is achieved
  • 6inch (150mm) Top Flue
  • Suitable to be used with Class 1 Chimneys and Prefabricated Flues
  • Inset Depth of 360mm
 Product Code: 0128-0009
Was £1499.00 Delivery estimate 10 working days
£1204.00 inc vat free delivery

Charnwood LA 50iB Inset Boiler Stove

Inset Depth 164 mm
Inset Height 619 mm
Inset Width 554 mm
Outset Depth 360 mm
Outset Height 547 mm
Outset Width 400 mm
Weight 127 kg

NOTE: The free delivery service offered on this product is based on a one man only delivery. Due to the nature and weight of this product, you will need to arrange additional assistance to offload the goods from the vehicle when it arrives. A curb-side d_rop off service is provided with this product. Heat outputs are based on Ancit Tests, outputs vary with fuel types. For minimum clearances please refer to installation instructions. The glass may blacken on lower settings, however increasing the heat should burn any subsidiary carbon off. NOTE: Please ensure to have a survey carried out by a qualified Hetas approved Solid Fuel engineer to check and certify the compatibility of your chimney with this stove before making any purchase to avoid disappointment. Note: This stove produces substantial heat output which may affect the interior and exterior appearance of the stove, over time through general wear and tear which is quite normal and to expected when burning Solid Fuel. If you would like further information on Solid Fuel, call the Solid Fuel Association on 0845 601 4406 or Email sfa@solidfuel.co.uk or to have a look at their website www.solidfuel.co.uk. Alternatively if you would like to find your nearest Hetas approved engineer, simply call HETAS on 0845 634 5626 or Email info@hetas.co.uk or to have a look at their Website www.hetas.co.uk where you will find a comprehensive list of engineers. NOTE: The LA 20i, SLX 20i and LA 30iB require a 150 Degree Flue Bend. The optional addition for hot water boilers on some stoves will alter the room output figures when used with the stove. Note: Flue stove pipe is not included with the stove, however it is available from all good builders and plumbing merchants. For further information on Charnwood products please visit www.charnwood.com.