Apex Lux Portrait Hotbox Gas Fire

Apex Lux Portrait Hotbox Gas Fire

Hover your mouse over the image to Zoom In

Options for the Apex Lux Portrait Hotbox Gas Fire...

 

 

Trims

Apex Lux 4 Sided Brass (Sir)
Apex Lux 4 Sided Brass (Sir)
included in price

select:
Apex Lux 4 Sided Brushed Brass (Sir)
Apex Lux 4 Sided Brushed Brass (Sir)
included in price

select:
Apex Lux 4 Sided Brushed Chrome (Sir)
Apex Lux 4 Sided Brushed Chrome (Sir)
included in price

select:
Apex Lux 4 Sided Chrome (Sir)
Apex Lux 4 Sided Chrome (Sir)
included in price

select:

Fuel Effects

Apex Coal (Sir)
Apex Coal (Sir)
included in price

select:
Apex Mixed Pebbles (Sir)
Apex Mixed Pebbles (Sir)
included in price

select:
Apex Lux Coals and Twigs (Sir)
Apex Lux Coals and Twigs (Sir)
£15.00

select:

Gas Types

Natural Gas (NG)
Natural Gas (NG)
included in price

select:
Propane Gas (LPG)
Propane Gas (LPG)
included in price

select:

Controls

Apex Remote Control (Sir)
Apex Remote Control (Sir)
included in price

select:

Description

  • Maximum heat output of up to 3.9kW
  • Fully sequential battery operated remote control as standard
  • Dancing flame effect on a bed of traditional coal, modern mixed pebbles or a coal & twig fuel effect
  • Hole in the wall open fronted gas fire
  • Contemporary trim includes fret and is available in various finishes, traditional brass, brushed brass, brushed chrome or a modern chrome finish
  • Modern graphite grey back panel included
  • Oxygen Depletion system monitors oxygen levels in the room as safety feature
  • Shown opposite in the stylish brushed brass finish
  • Designed for homes with a class 1 & 2 chimney or 175mm metal prefabricated flue
  • No additional ventilation into the room is required as the gas input is only 6.9kW
  • Natural gas or LPG available
  • Inset depth of 170 mm
Product Code: 0081-0570
Was £899.00 Delivery estimate 10 working days
£539.00 inc vat free delivery

Apex Lux Portrait Hotbox Gas Fire

Inset Depth 170 mm
Inset Height 550 mm
Inset Width 360 mm
Outset Depth 62 mm
Outset Height 804 mm
Outset Width 704 mm

NOTE: Please ensure to have a survey carried out by a Gas Safe Register registered gas installer to check and certify the compatibility of your chimney or flue with this fire before making any purchase to avoid disappointment. Installation of a Liberty appliance also requires either a class 1 chimney or alternatively a false chimney breast which can be constructed in the room with a 175mm diameter metal flue system. The gather hood option is available if you are connecting to a prefabricated flue or in instances where the product is being installed into an open chimney without a liner, which will also help to minimise heat loss and soot / debris falls onto the fire. (Gather hood included in the cost of this fire) The gather hood terminates with a square opening, if attaching to a flue liner the Flue adaptor will be required (FLUE ADAPTOR NOT INCLUDED IN THE COST OF THIS FIRE). IMPORTANT: Installation also requires a 100mm hearth in front of the appliance (as shown in the image above), although this may be at floor level (HEARTH NOT INCLUDED WITHIN THE COST OF THIS FIRE). The Apex remote control included with this fire allows the flame height to vary between high and low from your armchair. Also be aware that due to the fire producing heat the interior of the fire may become marked over time through general wear and tear which is quite normal and to be expected. NOTE **** If you are planning to put a television above this appliance and you have a normal flue with adequate draw on it, then it may be possible, as long as the distance to the TV is a minimum of 450mm from the top of the fire and as long as it has been checked with the TV manufacturers installation instructions with regard to installation and heat proximity. If in doubt please contact and check with your TV manufacturer. Due to the number of size measurements on this fire it is strongly recommended that you have the appliance on site / in your possession to take accurate measurements from before proceeding to create any aperture in the wall to avoid potential mistakes being made.